Home > matlab projects > Proj 36 Transient Stability Analysis of Power System

Project Title: Transient Stability Analysis of Power System

Brief Introduction:

A simulation of SPWM (Unipolar) strategy is presented for solitary period connection that is complete in this project. The simulation associated with the voltage that is single-phase is unipolar inverter device model is simulated in Matlab/Simulink. The modulation ratio change from 0.4 to 0.9 by varying amplitude of modulating signal. The outputs %THD and voltage that is present waveforms for adjustable AC voltages and modulation index are observed on range, to discover the additionally that is THD.SPWM are regarded as an amplitude that is constant with various responsibility period for each and every duration. The width of the pulses are modulated in purchase to have inverter production voltage control also to reduce its harmonic content. Sinusoidal pulse width modulation or SPWM could be the strategy that is many is common motor control and inverter application. Conventionally, to come up with the indication, triangle revolution being a carrier signal is weighed contrary to the revolution that is sinusoidal whose frequency is the desired regularity. In next the equipment design for unipolar voltage switching for inverter for fixed modulation index which is tested for various lots being resistive.

Hardware Details:


  • UPS (uninterruptible power supplies).
  • DC-DC converters
  • DC-AC inverters

Software Details:


Block Diagram:

For more details