Home > vlsi projects > Proj 2 CAN Controller Design
Project Title: CAN Controller Design
Brief Introduction:
This project describes how an FPGA had been made to control a controller that is could. The gear is described by it which are various whenever working with Actel's design tools consequently the number of work utilized. It gives a synopsis that is an issue of multiplexer, the mentor that is could an analog/digital-converter and some information that is additional the particular FPGA. It increases the look procedure of the FPGA, planning, coding, simulating, testing and lastly programming the FPGA. The components being different in the FPGA can be a shift-register and two state- machines which are linked to one another. It really works together to regulate the CAN controller produced by Philips. In addition they have data through the analog/digital-converter they ahead onwards towards the CAN controller that forward the data regarding the coach that is could.
The target associated with task shall stay an important because it involves patent-rights and other businesses. This work defines programming an FPGA by simply using VHDL. The FPGA was put into an currently finished circuit board. This implied that the signals to and through the FPGA are comprehended. The FPGA had been to obtain results as being a quantity that is correct up to a mentor controller linked to a transceiver for the system that is can-bus recognize it self on that bus system, send and receive information in the bus, accept information from the A/D-converter, light a diode with regards to the info gotten through the mentor additionally the A/D-converter and, lastly, get a handle on a multiplexer. A tools being few indeed wanted to produce this feasible. A desktop ended up being included by those tools to deal with the files and write the guideline, a synthesizer tool in order to make files required for the development unit that produces the useable FPGA. Whenever FPGA began to just take form a little but device that is helpful been acquired to make it possible to examine a finished FPGA signals using some type of computer and a device that is little an computer software between. The company Actel sells these tools. The way in which is design that is normal FPGA ought to be to create the guideline essential to program the FPGA today. Before development, the rule that is generated a synthesizer unit is run in a simulator device to see if it's going to make use of concept. Theory and training will maybe not match nonetheless it always's still an illustration that is very good it's going to take advantage of training. In that case your files which are produced accustomed to prepare the FPGA in a development product.
Hardware Details:
- FPGA
* Actel FPGA
- CAN-bus
- Multiplexer
- Analog/Digital-converter
* SJA1000 CAN Controller
Software Details:
- VHDL
- VERILOG
* Actel Desktop
* Design View
* Veribest VHDL Simulator
* Synplicity Synplify
* Silicon Sculptor
Block Diagram:
